Source code for sas.sasgui.plottools.transform

import math


[docs]def toX(x, y=None): """ This function is used to load value on Plottable.View :param x: Float value :return: x """ return x
[docs]def toX_pos(x, y=None): """ This function is used to load value on Plottable.View :param x: Float value :return: x """ if not x > 0: raise ValueError, "Transformation only accepts positive values." else: return x
[docs]def toX2(x, y=None): """ This function is used to load value on Plottable.View Calculate x^(2) :param x: float value """ return x * x
[docs]def fromX2(x, y=None): """ This function is used to load value on Plottable.View Calculate square root of x :param x: float value """ if not x >= 0: raise ValueError, "square root of a negative value " else: return math.sqrt(x)
[docs]def toX4(x, y=None): """ This function is used to load value on Plottable.View Calculate x^(4) :param x: float value """ return x * x * x * x
[docs]def fromX4(x, y=None): """ This function is used to load value on Plottable.View Calculate square root of x :param x: float value """ if not x >= 0: raise ValueError, "double square root of a negative value " else: return math.sqrt(math.sqrt(x))
[docs]def toLogX(x, y=None): """ This function is used to load value on Plottable.View calculate log x :param x: float value """ if not x > 0: raise ValueError, "Log(x)of a negative value " else: return math.log(x)
[docs]def toOneOverX(x, y=None): """ """ if x != 0: return 1 / x else: raise ValueError, "cannot divide by zero"
[docs]def toOneOverSqrtX(y, x=None): """ """ if y > 0: return 1 / math.sqrt(y) else: raise ValueError, "transform.toOneOverSqrtX: cannot be computed"
[docs]def toLogYX2(y, x): """ """ if (y * (x ** 2)) > 0: return math.log(y * (x ** 2)) else: raise ValueError, "transform.toLogYX2: cannot be computed"
[docs]def toLogYX4(y, x): """ """ if (math.pow(x, 4) * y) > 0: return math.log(math.pow(x, 4) * y) else: raise ValueError, "transform.toLogYX4: input error"
[docs]def toYX4(y, x): """ """ return math.pow(x, 4) * y
[docs]def toYX2(y, x): """ """ return math.pow(x, 2) * y
[docs]def toLogXY(y, x): """ This function is used to load value on Plottable.View calculate log x :param x: float value """ if not (x * y) > 0: raise ValueError, "Log(X*Y)of a negative value " else: return math.log(x * y)
[docs]def errToX(x, y=None, dx=None, dy=None): """ calculate error of x**2 :param x: float value :param dx: float value """ if dx == None: dx = 0 return dx
[docs]def errToX_pos(x, y=None, dx=None, dy=None): """ calculate error of x**2 :param x: float value :param dx: float value """ if dx == None: dx = 0 return dx
[docs]def errToX2(x, y=None, dx=None, dy=None): """ calculate error of x**2 :param x: float value :param dx: float value """ if dx != None: err = 2 * x * dx return math.fabs(err) else: return 0.0
[docs]def errFromX2(x, y=None, dx=None, dy=None): """ calculate error of sqrt(x) :param x: float value :param dx: float value """ if x > 0: if dx != None: err = dx / (2 * math.sqrt(x)) else: err = 0 return math.fabs(err) else: msg = "transform.errFromX2: can't compute error of negative x" raise ValueError, msg
[docs]def errToX4(x, y=None, dx=None, dy=None): """ calculate error of x**4 :param x: float value :param dx: float value """ if dx != None: err = 4 * math.pow(x, 3) * dx return math.fabs(err) else: return 0.0
[docs]def errFromX4(x, y=None, dx=None, dy=None): """ calculate error of x^1/4 :param x: float value :param dx: float value """ if x > 0: if dx != None: err = dx / (4 * math.pow(x, 3 / 4)) else: err = 0 return math.fabs(err) else: msg = "transform.errFromX4: can't compute error of negative x" raise ValueError, msg
[docs]def errToLog10X(x, y=None, dx=None, dy=None): """ calculate error of Log(x) :param x: float value :param dx: float value """ if dx == None: dx = 0 # Check that the point on the graph is positive # within errors if not (x - dx) > 0: msg = "Transformation does not accept" msg += " point that are consistent with zero." raise ValueError, msg if x != 0: dx = dx / (x * math.log(10)) else: raise ValueError, "errToLogX: divide by zero" return dx
[docs]def errToLogX(x, y=None, dx=None, dy=None): """ calculate error of Log(x) :param x: float value :param dx: float value """ if dx == None: dx = 0 # Check that the x point on the graph is zero if x != 0: dx = dx / x else: raise ValueError, "errToLogX: divide by zero" return dx
[docs]def errToYX2(y, x, dy=None, dx=None): """ """ if dx == None: dx = 0 if dy == None: dy = 0 err = math.sqrt((2 * x * y * dx) ** 2 + ((x ** 2) * dy) ** 2) return err
[docs]def errToLogXY(x, y, dx=None, dy=None): """ calculate error of Log(xy) """ # Check that the point on the graph is positive # within errors if not (x - dx) > 0 or not (y - dy) > 0: msg = "Transformation does not accept point " msg += " that are consistent with zero." raise ValueError, msg if x != 0 and y != 0: if dx == None: dx = 0 if dy == None: dy = 0 err = (dx / x) ** 2 + (dy / y) ** 2 else: raise ValueError, "cannot compute this error" return math.sqrt(math.fabs(err))
[docs]def errToLogYX2(y, x, dy=None, dx=None): """ calculate error of Log(yx**2) """ # Check that the point on the graph is positive # within errors if not (x - dx) > 0 or not (y - dy) > 0: msg = "Transformation does not accept point" msg += " that are consistent with zero." raise ValueError, msg if x > 0 and y > 0: if dx == None: dx = 0 if dy == None: dy = 0 err = (2.0 * dx / x) ** 2 + (dy / y) ** 2 else: raise ValueError, "cannot compute this error" return math.sqrt(math.fabs(err))
[docs]def errOneOverX(x, y=None, dx=None, dy=None): """ calculate error on 1/x """ if x != 0: if dx == None: dx = 0 err = dx / x ** 2 else: raise ValueError, "Cannot compute this error" return math.fabs(err)
[docs]def errOneOverSqrtX(x, y=None, dx=None, dy=None): """ Calculate error on 1/sqrt(x) """ if x > 0: if dx == None: dx = 0 err = -1 / 2 * math.pow(x, -3.0 / 2.0) * dx else: raise ValueError, "Cannot compute this error" return math.fabs(err)
[docs]def errToLogYX4(y, x, dy=None, dx=None): """ error for ln(y*x^(4)) :param x: float value """ # Check that the point on the graph is positive # within errors if (not (x - dx) > 0) or (not (y - dy) > 0): msg = "Transformation does not accept point " msg += " that are consistent with zero." raise ValueError, msg if dx == None: dx = 0 if dy == None: dy = 0 err = math.sqrt((4.0 * dx / x) ** 2 + (dy / y) ** 2) return err
[docs]def errToYX4(y, x, dy=None, dx=None): """ error for (y*x^(4)) :param x: float value """ # Check that the point on the graph is positive # within errors if dx == None: dx = 0 if dy == None: dy = 0 err = math.sqrt((dy * pow(x, 4)) ** 2 + (4 * y * dx * math.pow(x, 3)) ** 2) return err